Our Blog

Orthodontic treatment involves a lot more than just straightening your teeth. For a healthy smile, your bite must be healthy as well! This means that the upper and lower jaws need to fit together properly and comfortably.

If your bite is out of alignment because of jaw misalignment, orthodontic treatment can help correct the shape and position of your jaws with devices called functional appliances. These appliances are most often used for young patients whose bones are still growing, and are designed to treat malocclusions, or bite problems.

Common malocclusions such as overbites and overjets can occur when the upper teeth protrude further than they should, or the lower jaw is positioned too far back, or both. The Twin Block appliance can be used in such cases to help move your lower jaw and teeth into alignment with your upper jaw.

Why “Twin”? Because the Twin Block appliance is two separate pieces, each made of wire and smooth acrylic. Both pieces are crafted to fit precisely over your upper and lower arches and can be adjusted as your treatment progresses. The top plate can also be adjusted, if necessary, to widen the upper palate.

Why “Block”? Acrylic blocks cover the biting surfaces of several of your upper and lower teeth. These blocks fit together like a 3D puzzle. When you bite down, the upper blocks interlock with the lower blocks, pushing the lower blocks forward just a bit before you can bite down completely. Over time, bit by bit (and bite by bite), the Twin Block appliance advances your lower jaw and teeth to create a balanced, comfortable bite.

For the quickest and best results, you should wear your Twin Block appliance as directed. It’s made to be worn comfortably while you sleep, eat, and otherwise go about your day. (It’s a good idea to check with our Philadelphia, PA orthodontic team to see about removing it when you’re active, especially for swimming and contact sports.) When it’s time to brush, the Twin Block appliance is removable. This means that you can clean your teeth and your appliance easily.

And, while it’s made to work hard for you, it’s not indestructible. Don’t expose your appliance to heat or hot water, as the plastic may warp. Use the cleaning methods we recommend. Finally, when your appliance is out of your mouth, keep it in its case! You don’t want your appliance to end up carefully wrapped in a napkin in the nearby recycling bin. Or, even worse, in your dog’s mouth instead of yours.

The Twin Block appliance might fit together like a puzzle, but there’s nothing puzzling about how to achieve your best and fastest results. Your success really depends on you. Follow Dr. Joseph Brogan and our team’s advice, wear your appliance as directed, and you’ll be on your way to a healthy, comfortable bite and an attractive, confident smile!

One of the most common reasons for getting braces is because there’s just not enough room for all your teeth to fit next to each other evenly. The result is overlapping and crooked teeth. What’s the first step in creating the space you need? Well, that depends on just how much room you need to align your teeth and bite properly.

When there is going to be a serious need for space, there are orthodontic solutions that can help, including palatal expanders, surgical options, and extractions. But if you only need a tiny bit of room so that regular braces will fit properly, we have a tiny solution—orthodontic spacers!

Why do you need to make space before you get braces? Because Dr. Joseph Brogan might need to make some room around crowded molars so your braces can be installed properly.

For example, you might need orthodontic bands to anchor your braces. An orthodontic band is a slim, custom-fitted ring of metal which fits snugly around a molar. It is durable, provides a place to attach bands and springs to help correct malocclusions (bite problems), and can securely surround a tooth that might be weak because of a large filling. Spacers can separate crowded teeth just enough to allow a band to be fitted around a molar.

Even if you don’t need bands, sometimes separators are necessary to provide enough space between the teeth for your braces to work effectively. The back teeth tend to move even closer together with braces, and, without adequate space, bite problems, risk of decay, and other difficulties can arise.

And while you might think that some serious equipment is in order to make room between those sturdy molars, the typical spacer, or separator, is actually extremely simple--usually a tiny, round elastic band, often made of rubber. Spacers can be placed between tight teeth in a matter of minutes. Each ring is stretched and positioned between your teeth with a special tool. As it returns to its original shape, the spacer’s width provides just enough pressure on the teeth it touches to make a bit of space between them. And a bit of space is usually all you’ll need.

What do spacers feel like? For some people, they can be uncomfortable. You might feel soreness, some pressure, or as though a piece of food is stuck between your teeth. Ask us for suggestions on making you more comfortable, whether it’s dining on ice cream and cold drinks, eating soft foods, or taking over-the-counter pain relief. Separators are only designed to be in place for a very short period (usually under two weeks), but if they are causing you pain, give us a call.

What do you need to do to help the process along? Actually, it’s more what you need not to do. Don’t use dental picks or floss on your separators, avoid chewing gum, and take chewy and sticky foods off the menu. And don’t be tempted to touch or play with your spacers!

Spacers can create space between the teeth so quickly and efficiently that they often fall out on their own after a few days. If your separators fall out, give our Philadelphia, PA office a call. It could mean that you are ready for your braces, and on the way to a lifetime of healthy, beautiful smiles. And it’s a journey that begins with a tiny, springy step.

Dr. Joseph Brogan and our team have the experience and training to evaluate the present state of your teeth and bite, and to design a treatment plan to give you the healthy, attractive smile you picture for your future. And when you choose Invisalign^® for your treatment, you’ll be able to get an advance view of exactly what that future will look like!

How is this possible? Because when you choose Invisalign, you’re getting the benefit of some of the most advanced technology in orthodontics.

The process begins with a computerized scan of your teeth and mouth. Special scanner software creates a 3D image to capture your smile as it is now. But that’s not all. Using our customized treatment plan, Invisalign software can provide not only a model of your smile today, but an evolving model of what your smile can be. Seeing your present smile transform step-by-step into your future smile is a great motivator to follow that treatment plan!

For each step of your treatment, Dr. Joseph Brogan will provide a new set of aligners created to move your teeth and bite toward this goal. Why don’t you need a mold made of your teeth every time you get a new aligner? Because, with Invisalign, we design your aligners to fit your future tooth alignment.

Aligners are not fabricated to snugly fit around your teeth as they are, but as they will be after several days of wear. Each set is molded with small improvements to your alignment, and provides gentle, consistent pressure to move your teeth to that next step.

This “future fit” is why you may experience a bit of discomfort with a new set of aligners. Over the days that you wear them, the fit will become more and more comfortable. This won’t be because your aligners have changed. It will happen because your teeth have gradually moved where your aligners direct them.

Once your teeth and bite have reached this new step in your treatment, it will be time for the next set of aligners in the series, and so on. Dr. Joseph Brogan will let you know just how long you need to wear each set, and you can even track your progress with every appointment.

So, are we predicting the future? Not really. When you use Invisalign, we are planning and creating your future smile. Dr. Joseph Brogan will use the Invisalign system to customize your treatment for your very specific needs, step by step, and aligner by aligner, until you attain the smile you previewed before you even started treatment.

But one thing we can predict: If you follow our recommendations, keep your appointments at our Philadelphia, PA office, and wear your aligners as directed, there’s going to be a beautiful, healthy smile in your future.

If you’ve never been to an orthodontist before, you might be wary of what to expect during your first visit. Your dentist may have recommended an orthodontic appliance if it could improve the state of your oral health. More often, you may suspect that you or your child should have orthodontic work done if the time is right financially.

Understanding the various options your orthodontist can perform will be helpful to know before your appointment.

Your initial appointment usually lasts at least an hour. It’s common that diagnostic work will need to be done. This might include getting X-rays so Dr. Joseph Brogan can better understand the overall structure of your mouth. A quick mold of the mouth may also be taken if braces are a possibility.

Your first appointment is intended to find out how we can efficiently give you a great smile! Here’s a list of common questions you might ask during your first visit:

• Is now the right time for treatment, or should it wait?
• What is the estimated length of time for the treatment?
• How much should I expect to pay? What are the payment options?
• What can I do to prevent or minimize pain?
• Is it likely that I will wear extra appliances in addition to braces to correct my overbite, underbite, or other problems?
• Are there specific foods I will need to avoid?
• Will braces prevent me from playing my favorite sport or musical instrument?
• How can I keep my teeth clean with braces?
• How often will I be expected to come in for checkups and other appointments?

Don’t be afraid to ask these and other questions before you or your child commits to getting braces. Dr. Joseph Brogan and our team are happy to answer any of them before or after your visit.

Once you’ve had your initial consultation, our team will be here throughout the entire process if any problems arise. We look forward to seeing you at your first appointment in our Philadelphia, PA office!